Refrigeration Engineers in Devon – Ways to Diagnose a Problem

by | Dec 4, 2014 | Business

Recent Articles

Categories

Archives

Keeping your food chilled is essential for avoiding food poisoning and early food expiration. This is why it is vital that you take it upon yourself to get in touch with refrigeration engineers in Devon once in a while, whether this is for an annual service or for the replacement of parts. Odd sounds and smells are two clear signs that something is up with the refrigerator in your home, so why not educate yourself to ensure problems are dealt with in a timely manner?

The Power Source

Take the time to check if the power cord is plugged in all the way and if it is, inspect the cord for damages. Cuts or kinks in the cord could affect the refrigerator from working. In this case, refrigeration engineers in Devon will need to replace the cord to prevent the appliance from malfunctioning. Have you been using an extension cord to send power to the refrigerator? If so, try using a different one, or connect a different appliance to the cord to figure out if this is the cause of the problem.

The Voltage

A voltage tester will be your best friend when your refrigerator stops working, because by using a tester like this you can find out if the appliance is using too much or too little energy. The refrigerator consumes more energy than any other appliance in the home, because it is constantly running to maintain a suitable temperature. Each refrigerator will have a tag on it and this tag details the specific voltage it runs on, therefore if the voltage tester is not accurate, call refrigeration engineers in Devon for assistance right away.

The Vents and Drain Tubes

You could be the handyman yourself when it comes to checking the vents and drain tubes, but to avoid damaging the refrigerator further, professional assistance is recommended. Signs of a problem with the vents and drain tubes will be leaks or puddles of water accumulating beneath the refrigerator. When the drain tubes get plugged, water will leak into the compartment below. A hair dryer can be used to melt any build-up of ice. Once this has been done, the drain hole should be cleaned before air is blown into the tube to remove any debris build-up. Should problems continue, replacing the device would be the best option.

Are you looking for a company that offers refrigeration repairs and sales? If so, contact KJR Refrigeration to speak to one of the experienced refrigeration engineers in Devon.

Related Articles