When a hydraulic hose is found to be in need of repair, it is a job of a most critical nature. This is because hydraulic hoses are essentially the circulatory system for an industrial motor. It is essential that the problem is found quickly and repaired as soon as possible. Here are proven methods on how best to perform Hydraulic Hoses Repair in Aurora.
Step 1
The first thing that must be done is to identify the spot where the leak is coming from. Hydraulic hoses are very often tightly wound through machines, around corners, and through tight spaces. For this reason, it can often as appear as the leak is coming from one spot when, in fact, it is coming from a completely different spot. It is best to clean and dry the area that the leak appears to be coming from. From there, the source can either be instantly identified or at least narrowed down. Once the source of the leak has been found, it is now time to begin the process of repair.
Step 2
Depressurize the hydraulic system. Make sure to evacuate the pumps and shut the accumulator off. This guarantees that hydraulic fluid will not spray everywhere in an uncontrollable fashion.
Step 3
Now the problem needs to be addressed. If the problem is something as simple as a loose nut, simply tighten the hose nut, pressurize the system once again and see if the problem is fixed. If it is not, it may be the time the hose is replaced, as Hydraulic Hoses Repair in Aurora may not be an appropriate solution.
Step 4
If there are any signs of wear or cracks on the hose, it cannot be repaired. It must be replaced. This is because the high-pressure would be too much for the hose to endure and continuing usage could result in serious accident or death.
In an instance where replacement versus repair is needed, it is best to call in a professional and experienced company such as Miller Hydraulic Service Inc. They can ensure the hose is replaced in a safely manner and complies with all OSHA guidelines.
