Thanks to a variety of advances in heating technology, it is now possible to select from multiple ways of heating a home besides the traditional forced heating system. However, not all of these ideas are new such as the boiler system or radiant heating. In fact, radiant heating existed before the advent of the forced air units that people have become accustomed to. Of course, these systems were usually bulky and often quite aggravating to use because they pumped heated water or steam through a series of pipes and into various radiators placed throughout the building. When this type of heating system begins to leak, it is time to think about Heating System Repair in Bryn Mawr.
The more common methods of forced air distribution include the central furnace or the HVAC (Heating, Ventilation and Air Conditioning) system. For all intents and purposes, the heating system used in the latter is simply an adaptation of a stand-alone version of the former. The system works by heating air inside the furnace and forcing it into the building. Granted, the whole process is a bit more complex. For instance, the central heating unit must be able to cycle the source of heat on and off as well as the blower system that moves the heat. To ensure this system operates efficiently one should invest in annual maintenance and prompt Heating System Repair in Bryn Mawr.
Some advances in heating are simply adaptations of existing methods. Consider the high velocity air supply. These units are designed to connect to a series of small ventilation pipes and avoid the use of large, ugly air ducts. High velocity air systems use pipes about two inches in diameter to control the flow of treated air. This allows the installer to run the ducts in the walls or along the joists. This can be useful when installing a heating system in a historical project or any home where the owner wants to avoid unsightly air ducts.
Alternately, the property owner could opt for a split or in-line system. These are simply separate heating units that also have the capability of cooling the space. The AC portion functions much like the condenser and coil system used in an HVAC except the compressed refrigerant is channeled to specific areas. Benefits include temperature control over various zones, and a reduced utility bill. Visit for more information.
