Winter is almost in the rearview mirror, and soon, summer will be knocking at your door. It’s a great season; however, if your AC is not up to snuff, you may be looking at AC replacement in Surprise, AZ. Instead of risking having a failing AC, go through the following examples of issues, check these off your list, and you’ll reduce the chances of having an AC that just doesn’t cut it.
Clean and Clear Surrounding Area
First and foremost, you want to make sure that all the areas near the AC unit and corresponding parts are clean and free of debris. AC’S needs airflow and clear space to operate at maximum efficiency. Clutter can block airflow and dirt can contribute to a clogged unit. Additionally, clutter can prevent you from properly servicing your AC.
Clean or Replace Filters
This is an easy and inexpensive task that can prevent thousands of dollars in damage. As stated earlier, ACs need good airflow to operate, and clogged filters can stop enough air to eventually cause damage to your unit. Fortunately, filters are easy to pop out, clean, or replace.
Clean Condenser Coils
Refrigerator coil brushes or soft brushes and vacuums work great at cleaning coils. Depending on your unit, you may have to remove a few pieces of the AC to get to the coils. Just remember to unplug the unit before working on it.
Test It Out
The next step is to fire it up. It may run a little rough if it has been sitting dormant for many months. However, this should clear up, and the unit should be running fine not too long after starting it up. If not, you may need to call for AC replacement in Surprise, AZ.
