Stone and brick are some of the most charming and strongest material of a building. Experienced Masonry contractors in Wilmington, DE should only perform restoring and maintaining the masonry of a building. Masonry rebuilding involves repointing, tuck-pointing, sealant replacement, masonry rebuilding, flashing remediation, facade inspection, historic preservation, and so much more.
Masonry rebuilding is so the masonry can be repaired or replaced with color and quality of the original building. If the structural steel has been corroded and water infiltration is present, both can easily cause rapid deterioration of a building.
Repointing
When the mortar joints deteriorate, they should be replaced with fresh and compatible mortar to improve a structure’s stability and longevity. Repointing is often referred to as tuck-pointing. Repointing of a historical building should only be completed with the correct mortar and techniques.
Flashing
The flashing on the building can absorb moisture and cause rot over time. Very often, older buildings do not have flashings installed, and the life of the building is considerably diminished. The flashing of any building should be thoroughly inspected by masonry contractors in Wilmington, DE.
When flashing details aren’t properly executed, the flashing can leak and allow the building to be saturated with moisture. Water infiltration of a building can be reduced by:
* Removal of masonry above the damaged area.
* Removal of the current flashing.
* Cleaning and repairing of the surface.
* New flashing installation that includes dams and weeps.
* And much more.
Masonry Cleaning
Masonry cleaning is not just about keeping a building looking its best; it’s also about protecting it from the sun, rain, snow, UV rays, and pollution. Failure to regularly clean the outside of a building will result in an unsightly curb appeal, but will also cause rapid deterioration of the building.
Stone, brick, or concrete has porous surfaces that water can easily get into. Mud and pollution will leave behind dirty streaks and increase the chance of more dirt and debris sticking to it. If you have a historic building that needs to be repaired, hiring the right company means the brick, stone, and mortar will all be completed correctly. Visit the website to find more information.
