There are two basic ways to heat water in your home: a tankless heater or a tank heater. A tankless heater is, as the name implies, a type of system that does not actually involve storing large amounts of water. This type of heater allows water to pass through when you turn on the tap. The heater then heats up the water as it passes through. This system is great for smaller apartments or for homes that don’t use much water.
However, if you use a lot of water, such as the amount an average home might use, you should consider tank water heaters. These are the most common type of water heaters and the type that often needs the most maintenance. A plumber can help you with that.
The Basics
Water heaters in Jackson, MS are fairly simple. They pipe in water from your municipal water source. The water is then heated either with an electric heating element or with an open natural gas flame.
You can click here to see some of the common maintenance services you might need. If your pilot light routinely goes out, your heater might need adjusting. In other cases, you might have a problem with the amount of oxygen. If you look at your natural gas flame, it should be blue. Natural gas burns blue in the presence of ample oxygen. However, if there is an insufficient amount of oxygen, the flame will be yellow. You should call a plumber immediately if that’s the case.
Other Problems
Other problems might arise with water heaters that are insufficient for the size of the house you’re in. If you frequently run out of the hot water through routine use, you need to think about upgrading your heater capacity. A plumber can help you determine what size heater you might need or if you simply need to adjust the amount of heat delivered to your current heater.
