Water leaks can not only waste water but also cause damage to a home, increasing the risk of mold or rotting wood near the leak. It’s best to fix any leaks right away to limit the cost of any necessary repairs. Check out these tips for Water Leak Detection in Oklahoma City OK if you suspect a leak but don’t know where it is.
Verify the Leak If Possible
There are a couple of ways to do this. Check your water bill to see if you’ve been using more water than usual. For a family of four, the typical usage is usually no more than 12,000 gallons each month. Another option is to turn off all of the water in the home and check the water meter. If it changes within about half an hour to two hours without any water being used, there is most likely a leak somewhere.
Check Common Leak Locations
Investigate the sinks, drains, toilets, showers, and bathtubs of the home for signs of leaks, as these are the most common locations. Walk around the house and listen carefully for the sound of a leak near any of these areas. You can test for a leaking toilet by putting food color in the tank and seeing if it migrates to the bowl without any flushing after about half an hour. This may be due to a damaged flapper valve or a flush level bar that’s sticking.
Consider Calling a Plumber
While some leaks, such as a leaking faucet due to a worn washer, are relatively easy to find and fix, you may need to call a plumber for Water Leak Detection in Oklahoma City OK in other situations. This is especially the case with less obvious leaks or those that take place underground. Always call a plumber if you don’t have any experience with fixing leaks, as you wouldn’t want to accidentally make the problem worse by trying (and failing) to fix it yourself.
Click here to learn more about dealing with leaks or to schedule an appointment and get money-saving coupons. They offer 24-hour service, 7 days per week. You can also visit them on Facebook.
